LightBlog

dimanche 31 janvier 2021

Some Galaxy S21 users in Europe report issues with Samsung Pay and software updates

Early Galaxy S21 series buyers in the U.S. and Europe started receiving their devices last week, and some users in the U.K. and Italy are facing issues with Samsung Pay and software updates on their new phones. According to reports, some users are not able to use Samsung Pay on their devices, and they haven’t received any of the software updates that rolled out over the last week.

While Samsung is yet to release a statement on the matter, it seems like the issue stems from the affected devices having the wrong software region set up. For the unaware, Samsung toggles certain features on a regional basis by setting the CSC. In the UK, some users report that their CSC is set to EUX (European Union) rather than BTU. Due to this, they’re not able to use Samsung Pay in the country or receive OTA updates.

As of now, it isn’t exactly clear what triggered the wrong CSC to be set up on the affected Galaxy S21 devices, but some speculate that it happened because they set up their phone without inserting their SIM card during setup. A few users in Italy have also reported having the wrong CSC set up on their devices, and according to a report from HDBlog, Samsung has started rolling out a fix in the region.

Our tipster, James Bennett (@JBennett360 on Twitter), reports that he also received a similar carrier services update in the UK to set the CSC to BTU. After receiving the update, he was able to download OTA updates and use Samsung Pay. This leads us to believe that Samsung is already on top of the issue and is rolling out updates to affected Galaxy devices to set up the correct CSC for their region. In case you’re facing a similar issue and haven’t received a carrier services update so far, you can try the steps outlined in this post to see if it corrects the CSC.

The post Some Galaxy S21 users in Europe report issues with Samsung Pay and software updates appeared first on xda-developers.



from xda-developers https://ift.tt/2YwIiZJ
via IFTTT

The OnePlus 7 and 7T are getting their final Android 10-based OxygenOS update

Last month, OnePlus finally released the first Open Beta of Android 11 based on OxygenOS 11 for the OnePlus 7 and 7T series, allowing early adopters to test drive the latest software ahead of the public release. As OnePlus works on readying the Android 11 for prime time, the company is rolling out a new software update to the OnePlus 7 and OnePlus 7T series in what will be the final Android 10-based stable update for these 2019 smartphones.

This is an incremental update that mostly fixes bugs and improves the overall stability. The update also bumps the Android Security Patch level to January 2021.

The full update changelog for the OnePlus 7 and OnePlus 7T series:

  • System
    • Updated Android Security Patch to 2021.01
    • Updated GMS package to 2020.09 (except 7 Pro 5G EU)
    • Improved the stability of the system (7 Pro 5G EU)

The OxygenOS 10.3.8 update is being pushed to the OnePlus 7 (Global and India) and OnePlus 7T and 7T Pro (India) while their equivalent EU and Global models will receive their respective updates shortly after.

As always, this will be a phased roll-out, meaning the update will be rolled out to a small batch of the user base initially, followed by a wider roll-out in the coming days. If you don’t want to wait for the OTA to reach your device, however, you can manually flash the update on your OnePlus phone using the OTA package provided below. Simply download the appropriate firmware package corresponding to your variant and place it in the root directory of your internal storage. Then navigate to Settings > System Update > “Local Update“ and select the downloaded package to initiate the installation.

XDA Forums: OnePlus 7OnePlus 7 ProOnePlus 7TOnePlus 7T Pro


Downloads

OnePlus 7

OnePlus 7 Pro

OnePlus 7T

OnePlus 7T Pro


Thanks to XDA Senior Member Some_Random_Username for the download links!

The post The OnePlus 7 and 7T are getting their final Android 10-based OxygenOS update appeared first on xda-developers.



from xda-developers https://ift.tt/3pwnIEF
via IFTTT

Telegram and Signal are the two viable alternatives to WhatsApp

WhatsApp has become the go-to messaging app for a big chunk of the world. And that is with good reason: it’s a (sort of) lightweight app that works amazingly well with all Android smartphones, old and new. Plus, you really have no way to go: with over 5 billion installs on Google Play, and a lot more on other platforms such as iOS, it’s safe to say that at least a good chunk of the world’s entire population is on WhatsApp. You can’t realistically compete against a communication app with this much momentum. Except, something made that tide turn a bit: WhatsApp tried to introduce more invasive privacy policies (then delayed them after backlash), and users started flocking to other, competitor apps.

Are you part of this crowd? So what are these alternatives, you might ask? Today, we’re gonna look at two of them: Telegram and Signal, which are the two that became the most popular after the WhatsApp controversy. And we’re gonna stack both of them up against WhatsApp, which is still king in terms of sheer userbase but lacks features compared to the other two. Read on to know more!

Signal: Unbeatable on privacy and security

Signal messenger logo

If security and encryption are all you’re after, then Signal is as good as it’ll get when it comes to both of those things. It is fully open-source both in the server-side of things as well as the client itself, which in user terms means that everything the app does, picks up, and does with your information is fully transparent. And the app is fully ad-free and developed, maintained, and funded by the Signal Foundation, which is completely non-profit, unlike WhatsApp, which is owned by Facebook, Inc—people who care quite a bit about profits.

It doesn’t store any of your data, and also comes with a flurry of privacy-focused features as well as, of course, end to end encryption for all of your messages and conversations, so nothing that goes through the app’s server can be seen or intercepted by anyone—it’s encrypted on the server end and decrypted on the recipient end. It’s definitely not the end-all of secure messaging, something that has been proved by the occasional bug. But if you care about your privacy a lot, as we said before, then Signal will do you good.

It’s also a fairly friendly messaging app as the app is pretty basic so far. The UI comes across as kind of iOS-ish on Android, and it lacks a wide array of features that come with other messaging apps, such as stories. And the other rough point is that, well, it doesn’t have remotely the same user base as WhatsApp or even Telegram. It has grown greatly in the past few weeks, don’t get me wrong, but at 50 million installs, it has roughly 10% as many users as Telegram, which itself recently broke 500 million installs. It also has 1% as many installs as WhatsApp, which clocks in at 5 billion installs to date.

If you’re lucky enough to have the people you care about on Signal, though, then it’s really, really worth it if you mind privacy a lot.

Signal Private Messenger (Free, Google Play) →


Telegram: Middle ground with lots of features

 

A lot of security analysts point out that Signal is more secure than Telegram. Telegram’s apparent “negative” is that it features a different method of encryption. While Signal uses its own Signal protocol, which encrypts data end-to-end, Telegram doesn’t have end-to-end encryption (secret chats do, though). Telegram chats are fully accessible on any device you log into and are stored in the cloud using a symmetric encryption scheme called MTProto, developed in-house by the Telegram team and touting features such as 256-bit symmetric AES encryption, 2048-bit RSA encryption, and Diffie–Hellman key exchange.

Telegram goes a long way towards being more of an integrated social ecosystem compared to other messaging apps. The app features channels as well as groups with thousands of people that act more like communities rather than just group chats. It also enjoys a diverse install base on both iOS and Android for this very same reason. And it’s absolutely packed with features. Just to mention some of them, there’s support for bots that add extra functionality to the app as well as to group chats, there are animated stickers, the app is fully customizable, it has chat folders, it allows you to use more than one phone number (or not use one at all)… I could go on and on.

It’s my personal favorite among the three. And it also has a pretty steady user base: with the recent WhatsApp controversy, the Telegram team recently announced that they had surpassed 500 million active users, a new milestone that is still far less than the one WhatsApp has, but it’s still pretty good and a healthy sign for what’s to come for the Telegram team.

Telegram (Free, Google Play) →


WhatsApp: The popular choice

whatsapp

Finally, we have to measure WhatsApp against the two other options I’ve listed. And contrary to what you might think, it doesn’t stack up that badly. WhatsApp actually features end-to-end encryption for everything including messages, calls, and video calls, and it uses the very same protocol Signal uses, the Signal protocol. Your message history is, however, stored unencrypted in backups, so that’s something you should have in mind.

In reality, though, concerns regarding the app don’t arise for security, but rather for privacy. WhatsApp is owned by Facebook, which doesn’t exactly have a good track record when it comes to privacy, and they’ve been forced to keep the app free to use and free of ads because of user outrages (although they do want to change that). And the newest privacy policies, which are set to come into effect in May now, have made these concerns way worse.

WhatsApp also picks up a lot of information, such as your personal information, your phone number, your location, and more, which certainly raises the ears of those who care about privacy. Nonetheless, WhatsApp remains popular, and for mainly one reason: its massive userbase. A big majority of smartphone users at a global scale are using WhatsApp as well, and while outrage over these new policies have made a lot of people switch to other alternative apps, it hasn’t really been enough to steal WhatsApp’s thunder, at least for now.

As for features, though, it actually comes with a healthy amount of features. It supports video calls, stickers, stories, and they recently even introduced disappearing messages. They also have a special application for businesses, that allows users to chat directly with a business and even buy things right from the app if you’re in the right market.

WhatsApp Messenger (Free, Google Play) →


The Bottom Line: Which is Better?

Honestly, it depends on what your priorities are and, rather unsurprisingly, which messaging services your friends and close ones use. WhatsApp is the messaging app I use the most because it’s the one where most of my friends and family members are, but in terms of features and overall user experience, my favorite, by far, is Telegram. Both WhatsApp and Telegram are considered one of the best apps to install first on a new smartphone, and there’s fairly good reason for that.

Then again, if you care a lot about privacy and are lucky enough to have all of your friends on it (or you can get the people you care about to download the app), then Signal is the better option by far among the best WhatsApp alternatives due to all of the privacy and security-focused features the app packs, not just encryption. If you care about features and having a messaging app that you can actually make work the way you want to, then Telegram is probably the best option for you.

If you don’t care about either of those things and you just want something you can use to reach friends and family, then WhatsApp is, at the moment, probably the best option for you. This might change in the future and WhatsApp’s current stronghold in the market might fade a bit as the two other big players grow, but for now, that hasn’t happened.

If you really want to get rid of WhatsApp, perhaps the best middle ground is to use both Signal and Telegram — Signal for anything that is worth keeping private, and Telegram for all of its features.

The post Telegram and Signal are the two viable alternatives to WhatsApp appeared first on xda-developers.



from xda-developers https://ift.tt/2MoGkYX
via IFTTT

Create Your Own HUAWEI Watch Face and Win a HUAWEI P40 Pro!

The recent launch of the HUAWEI Watch GT2 Pro is an exciting moment for smartwatch users everywhere. This new smartwatch has a heavy focus on personalization and design. Creative people from around the world are putting their skills to use by making watch faces that others can enjoy. These creators include Medialink Creative, who designed the Le Petit Prince Watch Faces [seen in the image above].

The selection of watch faces continues to grow as HUAWEI’s community is constantly uploading new designs. You can also participate in this, by submitting your own design for a new watch face. By submitting your own design, you will be entered to a HUAWEI P40 Pro giveaway.

HUAWEI Themes has started the Empower Designer Incentive Program to encourage people from Europe to upload their Themes and Watch Faces. Join the Empower Designer Incentive Program and upload your own creations!

Get more information here.

     Huawei Watch GT2 Pro
    It offers a range of impressive features, including a 1.39-inch AMOLED display made from Sapphire Glass, battery life of up to two weeks, over 100 different fitness modes, wireless charging, around-the-clock heart monitoring, sleep monitoring, and oxygen saturation detector, 4GB of onboard storage, the ability to answer or reject phone calls, water resistance, and lots more.

 

One of the best ways to show off your custom watch face is with a Huawei Watch GT 2 Pro. This premium smartwatch comes with LiteOS, which is one of the best fitness-based OSes that there are. Pairing your watch with Huawei Health app can help you set up your ideal fitness tracking environment. You’ll find features for people who love snow sports, golfing, hiking, running, and just about any other major sport you can think of. There are over 100 workout modes that you can use to track your progress. The watch will automatically know when it’s time to start tracking, based on your movement. This means you’ll spend less time setting up a workout, and more time doing what you love.

Huawei Watch GT 2 Pro

The benefits of the Huawei Watch GT 2 Pro don’t end with fitness. Weather alerts can be seen at a glance. You can also monitor your health with Oxygen Saturation Detection and heart monitoring. A key aspect of good health is good sleep. Use the Scientific Sleep Monitoring with HUAWEI TruSleep 2.0. These features just scratch the surface of the many capabilities of the Huawei Watch GT 2 Pro.

We thank Huawei for sponsoring this post. Our sponsors help us pay for the many costs associated with running XDA, including server costs, full time developers, news writers, and much more. While you might see sponsored content (which will always be labeled as such) alongside Portal content, the Portal team is in no way responsible for these posts. Sponsored content, advertising and XDA Depot are managed by a separate team entirely. XDA will never compromise its journalistic integrity by accepting money to write favorably about a company, or alter our opinions or views in any way. Our opinion cannot be bought.

 

 

 

 

The post Create Your Own HUAWEI Watch Face and Win a HUAWEI P40 Pro! appeared first on xda-developers.



from xda-developers https://ift.tt/3pFxu7E
via IFTTT

[Update 2: Xiaomi Files Complaint] US bans Americans from investing in Xiaomi, citing ties to Chinese military

Update 2 (01/31/2021 @ 2:05 PM ET): Xiaomi has filed a legal complaint against the U.S. Defense and Treasury Departments. Click here for more information.

Update 1 (01/14/2021 @ 07:06 AM ET): Xiaomi has released a statement on the ban. Click here for more information. The article as published on January 14, 2021, is preserved below.

The U.S. Department of Defense under the outgoing Trump administration has named nine Chinese firms to an investment blacklist, including Chinese phone maker Xiaomi. The list that Xiaomi and eight other firms have been added to is a list of companies that are alleged to be “Communist Chinese military companies” that are operating either directly or indirectly within the United States. This is in accordance with the statutory requirement of Section 1237 of the National Defense Authorization Act for Fiscal Year 1999.

The Department of Defense announced its latest list earlier today. Under Section 1237 of the NDAA for FY 1999, the U.S. defines “Communist Chinese military companies” as “any person identified in the Defense Intelligence Agency publication numbered VP-1920-271-90, dated September 1990, or PC-1921-57-95, dated October 1995, and any update of those publications for the purposes of this section” as well as “any other person that–(i) is owned or controlled by the People’s Liberation Army; and (ii) is engaged in providing commercial services, manufacturing, producing, or exporting.” It’s unclear how Xiaomi fits this bill, as the company has mostly stuck to making consumer products.

As reported by Reuters, American investors will need to divest their holdings in each of the blacklisted firms by November 11, 2021. That’s because of an executive order signed by President Trump in November of 2020, barring Americans from investing in any companies added to the DOD’s list. Companies previously placed on this blacklist include Huawei and SMIC. What this means for the future of Xiaomi is not immediately clear, as while it’s not an outright ban on all trade, it’s possible that the company receives a large amount of investment from U.S.-based companies. For example, Qualcomm Ventures has publicly invested in Xiaomi, so by November 21st, Qualcomm may need to divest its holdings. That would affect Xiaomi’s stock price, but fortunately for the company, it won’t affect their supply chain.

If Xiaomi were to be placed on the U.S. Commerce Department’s Entity List (à la Huawei and DJI), the company would be barred from conducting any business with U.S.-based companies. Furthermore, any company using hardware or software developed primarily in the U.S., which includes many chip foundries and chip design firms, would also be subject to a trade ban with Xiaomi. Huawei’s placement on the Entity List crippled its ability to sell Android-based smartphones internationally, owing to its lack of a GMS license. The placement also crippled Huawei subsidiary HiSilicon’s ability to design new ARM-based chips.

Fortunately for Xiaomi, they have had time to prepare for the worst, which has yet to happen. “In any case, if in the future something happens, we have a plan B. Among other things, we are investing heavily in various semiconductor manufacturers in China, but we believe that our business strategy should not be conditioned by decisions made by politicians. Until now, we have opted for integrating the best components into our products, and we will continue to do so in the future”, Abi Go, Xiaomi’s global product manager, told Xataka early last year. It’s also possible that the forthcoming Biden administration may remove Xiaomi from this blacklist, though that reversal is not guaranteed. Whatever the case may be, this is a major developing story and the impact may not be felt for some time.


Update 1: Xiaomi releases statement; Qualcomm had already exited long back

Xiaomi has released a statement on Twitter disputing the allegations that it is a company tied to the Chinese military. Xiaomi says that the company is not owned, controlled, or affiliated with the Chinese military.

As well, it turns out that Qualcomm has already divested its holdings in the company at an unknown date. The venture capital arm of Qualcomm, Qualcomm Ventures, lists Xiaomi as “exited”. While no date has been confirmed for this exit, I was able to verify that the company has been marked as “exited” since at least August 6th, 2020.


Update 2: Xiaomi files legal complaint

On its official blog, Xiaomi has announced that it has filed a legal complaint in the U.S. District Court for the District of Columbia. The complaint is addressed to the Department of Defense and the Department of the Treasury, which are undergoing changes in leadership with the transition from President Trump to President Biden. Xiaomi claims the DoD’s decision was factually incorrect and deprived the company of due process. The investment restrictions are set to go into effect on March 15, 2021, unless Xiaomi is removed from the list.

 

The post [Update 2: Xiaomi Files Complaint] US bans Americans from investing in Xiaomi, citing ties to Chinese military appeared first on xda-developers.



from xda-developers https://ift.tt/35CdN8H
via IFTTT

How to run multiple Android apps on your Windows 10 PC with Microsoft’s Your Phone

As a part of its partnership with Microsoft, Samsung had announced during the launch of the Galaxy Note 20 in August last year that the Your Phone app would soon offer support for running multiple apps on Windows. Following the announcement, Microsoft had started rolling out the feature to users who had opted for the Windows Insider program in November. The feature recently became generally available for all users with select Samsung smartphones.

According to Analy Otero Diaz, Principal Program Manager at Microsoft, the multiple apps experience in the Your Phone app is now available to all users running the Windows 10 May 2020 update or later. In order to run multiple apps from your Samsung device via Your Phone on Windows, there are a few prerequisites. These include the following:

  • The latest Windows 10 May 2020 update or later. It is recommended that you update to the latest version of Windows 10. You can check and update by heading to Settings > Updates & Security > Check for update
  • A recommended 8GB of RAM on your Windows PC
  • The latest version of Your Phone app on your Windows PC with version 1.20102.132.0 or higher
  • Your Phone companion app to link Windows with your Samsung device. Make sure you have version 1.20102.133.0 or higher. You can download the app from the Google Play store
  • You also need the latest Link to Windows Service with version 2.1.05.2 or higher. This can be downloaded from the Galaxy Store
  • Both the phone and PC should be connected to the same Wi-Fi network

Your Phone app for Windows 10

While Microsoft mentions that you need an Android 11 device to enable multi-app support on Your Phone, not all devices running Android 11 are supported. On a separate page, Microsoft lists all supported smartphones which currently only includes a bunch of Samsung devices. Here is the full list:

  • Samsung Galaxy Fold
  • Samsung Galaxy Note20 5G
  • Samsung Galaxy Note20 Ultra 5G
  • Samsung Galaxy S20
  • Samsung Galaxy S20+
  • Samsung Galaxy S20 FE
  • Samsung Galaxy S20 Ultra
  • Samsung Galaxy Z Flip
  • Samsung Galaxy Z Flip 5G
  • Samsung Galaxy Z Fold2 5G
  • Samsung Galaxy Note10
  • Samsung Galaxy Note10+
  • Samsung Galaxy Note10 Lite

How to run multiple Android apps on Windows using Your Phone:

  1. Once you have met all the requirements mentioned above, open the Your Phone app on your Windows PC
  2. The app will ask you to select between Android or iPhone. Select Android and click on Continue
  3. Next, you will be asked to install/update to the latest version of Your Phone Companion app on your Samsung smartphone by heading to this link (www.aks.ms/yourpc)
  4. After you have installed/updated the companion app on your phone, confirm the same on the Your Phone app on your PC and open the QR code
  5. On your supported Samsung smartphone, head over to Settings > Advanced Features and head to Link to Windows
  6. Enable the service and tap on Add Computer and use the phone’s camera to scan the QR code displayed on the Your Phone app on your PC
  7. Sign in to your Microsoft account and wait for a confirmation to allow your phone to be connected to your PC
  8. You should now be able to see your phone on the Your Phone PC app
  9. Head over to the Apps section on the left to get access to all apps installed on your phone

How to interact with apps:

One can interact with apps using your PC’s mouse, trackpad, keyboard, pen, or touch-enabled screen.  Here are some tips if you are using a mouse and keyboard:

  • Single click  will behave the same as any single touch/tap interaction
  • Right click  anywhere on your phone screen to navigate to the previous page
  • Click and hold will behave the same as a tap/hold interaction
  • Click and hold and drag to select content
  • Mouse scroll to move between pages vertically or horizontally

The post How to run multiple Android apps on your Windows 10 PC with Microsoft’s Your Phone appeared first on xda-developers.



from xda-developers https://ift.tt/3oAklv1
via IFTTT

OnePlus Nord N100 unbrick tool is now available

OnePlus had a busy 2020. Apart from the regular offerings, the Chinese OEM also dipped its toes into the budget smartphone market with the OnePlus Nord N10 5G and the OnePlus Nord N100. The wallet-friendly Nord N100 might not be a powerhouse with its 4G-only Qualcomm Snapdragon 460 SoC, but it does share a few things in common with its siblings: a display with a 90Hz refresh rate, an unlockable bootloader for tinkering, and last but not least, the ability to boot into Qualcomm’s Emergency Download Mode (known as EDL) on user trigger. Well, who doesn’t know that the easy availability of EDL flashers (commonly referred to as “MsmDownloadTool”) is the reason why most OnePlus devices are, for the most part, unbrickable?

OnePlus Nord N100 XDA Forums

In case you have a OnePlus Nord N100 and cannot help but wonder why the unbrick tool is not yet available for your device, we are glad to inform you that your wait is over. Our favorite OnePlus aficionado Some_Random_Username has managed to mirror the device-specific MsmDownloadTool package and write a guide explaining what steps are needed to recover a bricked Nord N100 all by yourself.

Download MsmDownloadTool for the OnePlus Nord N100

If your OnePlus Nord N100 is already bricked, connecting the device to a USB port on a PC running Windows should expose it as “QDLOADER 9008” (or “QHUSB_BULK”, if the required driver isn’t properly installed) under Device Manager. To manually trigger EDL mode, hold down both volume up and volume down buttons, and plug the phone into your PC.

There are a few caveats that you need to be aware of prior to using the tool to unbrick your OnePlus Nord N100. The most important being that if you wish to cross-flash a different regional build of OxygenOS during the flashing process, this will not work as the low-level firmware is now tied to the internal device region ID. Also, since OnePlus utilizes VMProtect 3.0 as an obfuscation/anti-debugging measure while building the flasher, your antivirus might flag it as a potentially rogue piece of software. This is a typical case of false-positive, so just ignore the warning and add the tool to the exclusion list of the antivirus.

The post OnePlus Nord N100 unbrick tool is now available appeared first on xda-developers.



from xda-developers https://ift.tt/3oAHmy6
via IFTTT

Discussion: Has Samsung actually gotten good at software updates?

If you’ve been keeping watch these past few months, you’d have noticed that Samsung has been slaying it with its software updates. Besides working relentlessly to roll out the latest Android 11-based One UI 3.0 update to a wide range of flagships and flagship-killers, Samsung has also rewarded several mid-range devices with a similar treatment. Along with this commendable promptness, the brand also deserves our appreciation for updating mid-rangers that other brands often forget. So, in this edition of our weekly Discussion series, we ask you if you think Samsung is leading the way among Android manufacturers when it comes to software updates?

Here’s when your Samsung Galaxy phone may get the One UI 3.0 (Android 11) update

While Samsung appears to be at the top of its game, the condition was certainly much different a few years ago. Ironic to the brand’s global reputation, Samsung also earned the blame for delaying software updates, limiting key updates — such as Android version incremental updates — to its flagship devices, and offering a cluttered user experience with its TouchWiz user interface that was later refreshed as Samsung Experience. Samsung addressed complaints about the poor UX by majorly overhauling it with the first One UI update back in 2018. Not just that, the frequency and the availability of the latest updates have also improved majorly in the last few years.

Samsung started floating the first One UI 3.0 beta in October 2020 and subsequently started rolling out stable updates in December 2020, starting with the Galaxy S20 series on Verizon. Since then, a slew of devices has received the stable One UI 3.0 updates. The list includes:

Aside from these devices, Samsung’s latest Galaxy S21 series comes pre-loaded with One UI 3.1, which brings a few extra features such as the improved Google Home Device controls. The Galaxy Tab S7 has also been updated with One UI 3.1 with a set of features to enhance collaboration and productivity.

Despite this promptness, however, Samsung still lags in one area and that is support for Seamless Updates on Android. The feature was introduced with Android Nougat, and it allows new updates to install in the background while the phone is still being used. While updates may normally take only a few minutes to install, we cannot deny that saving that time is also a bonus, especially in an age where we are constantly dependent on our phones. Until Google does not make Seamless Updates mandatory for manufacturers, we can expect Samsung to its own sweet time.

Whether Seamless Updates improve the user experience or not is another topic for yet another Discussion. For now, we would like you to share your opinions on what you think about Samsung’s enthusiasm for updates. Comments your views below!

The post Discussion: Has Samsung actually gotten good at software updates? appeared first on xda-developers.



from xda-developers https://ift.tt/3pAr35E
via IFTTT

samedi 30 janvier 2021

How to (maybe) bypass SafetyNet hardware attestation on devices with an unlocked bootloader

Over the last couple of years, the challenge of bypassing SafetyNet Attestation has evolved from a simple cat and mouse game between Google and the modding community to a burgeoning battle chock full of obscure barriers. Thanks to the rise of hardware-backed attestation techniques, it is very difficult to bypass the boot image integrity verification routine and hide root access. Installing Magisk alone wouldn’t be sufficient to circumvent the latest SafetyNet update, especially on newer devices. This is exactly where the Universal SafetyNet Fix Magisk module comes in.

While legacy device owners, as well as custom ROM users, often utilize modules like MagiskHide Props Config to spoof the CTS profile to pass basic attestation, as long as the method in question relies on a valid combination of device and model names, build fingerprints, and security patch levels, there’s no guarantee that the root hiding trick will remain useful in the future. This is due to the fact that Google Play Services is starting to use hardware attestation for CTS profile validation in many cases, even when basic attestation is selected.

In more technical terms, even if the SafetyNet Attestation API response from GMS will report that basic attestation was used, hardware attestation is always used regardless of the reported state in order to enforce integrity. As a consequence, the existence of a bootloader unlocked state in the key attestation report results in SafetyNet Attestation failing to pass.

In case you have an Android device that has an unlocked bootloader (or locked using custom verified boot keys) and thus doesn’t pass hardware attestation, then the Universal SafetyNet Fix Magisk module may fix that. Created by Danny Lin AKA XDA Senior Member kdrag0n, the module works by taking advantage of the opportunistic nature of the hardware attestation routine. Quoting the developer:

… it (hardware attestation) falls back to basic attestation if key attestation fails to run — and prevent GMS from using key attestation at the framework level. This causes it to gracefully fall back to basic attestation and pass SafetyNet with an unlocked bootloader.

The “not implemented” error code from Keymaster is used to simulate the most realistic failure condition to evade detection, i.e. an old device that lacks support for key attestation.

The workaround is already available pre-integrated on the ProtonAOSP ROM from the same developer, which lets you pass SafetyNet without Magisk on fairly modern devices such as the Google Pixel 5. If you are a custom ROM maintainer and you wish to integrate this method with your build, you can do so by cherry-picking the necessary patches from this repository. On the other hand, the latest version of the ready-to-flash Magisk Module variant can be found here. Note that MagiskHide is still required if the target device is rooted.

Universal SafetyNet Fix: XDA Thread ||| GitHub Repo

The post How to (maybe) bypass SafetyNet hardware attestation on devices with an unlocked bootloader appeared first on xda-developers.



from xda-developers https://ift.tt/3j1lZVq
via IFTTT

OnePlus 6 and OnePlus 6T seeing work for mainline Linux kernel support

One of the perks of buying a OnePlus smartphone is the aftermarket development support. The company is generally known for its timely kernel source code releases (they have been slow at publishing sources a couple of times) and promotion of custom ROMs for EOL devices among other things, which makes it a fan favorite in the developer community. We often speak about devices outliving their generation by leaps and bounds, and now it looks like two OnePlus phones are about to achieve a similarly remarkable feat in terms of third-party development. It’s been nearly three years since the launch of the OnePlus 6 series, but if you still have a OnePlus 6 or a OnePlus 6T lying around, it may soon be possible to boot it with the mainline Linux kernel.

OnePlus 6 Forums ||| OnePlus 6T Forums

The one thing that might convince many users to finally lay their old device to rest is if unofficial software support ends for the foreseeable future — something that is almost a guarantee to happen with nearly every smartphone out there. However, there is an independent developer named Caleb Connolly, who has been working hard to include the OnePlus 6 and 6T in the mainline Linux kernel, which will surely help pave the way for the prolonged life of these devices. He has already taken the important step of successfully booting a postmarketOS instance on the device duo.

OnePlus 6 running postmarketOS Linux

With the OnePlus 6/6T being built atop the Qualcomm Snapdragon 845 platform, the upstreaming effort isn’t too convoluted but principally adding the appropriate device tree bits for the kernel. Thanks to the existing minimal mainline support for the platform, features like Bluetooth, Wi-Fi, and 3D Acceleration are already working at the current stage of development. What’s more interesting is that users can even dual-boot postmarketOS and Android on the OnePlus 6 and 6T using the custom installer created by the developer.

postmarketOS for the OnePlus 6 and the OnePlus 6T

Previously, there have been Windows 10 ARM bootstrapped for the OnePlus 6T by another independent developer, albeit it didn’t spark too much interest. The situation is entirely different now, as Caleb has been actively involved in the process of upstreaming kernel patches with hopes of improving the situation for those wanting to run Linux on the OnePlus 6 and 6T in the near future. We look forward to many years of continued development for these phones.

The post OnePlus 6 and OnePlus 6T seeing work for mainline Linux kernel support appeared first on xda-developers.



from xda-developers https://ift.tt/3pxGLON
via IFTTT

How to add support for the PlayStation 5’s DualSense controller on your rooted Android phone

Did you manage to get your hands on a PlayStation 5 at long last? If you did, you surely must be enjoying the new DualSense controller accompanying the console. Since the launch of the DualShock 4 with the PlayStation 4, the controllers for the PlayStation have also been an amazing controller to use on other devices, such as your PC, and yes, your smartphone. Android does support the DualShock 4 for the most part in current versions, and you can expect to use your controller just the way you would use it on your PS4. The PS5’s DualSense, though? Your mileage may vary. To be clear, it’s an amazing controller that adds to the best aspects of the DualShock 4 with new features and improvements across the board. But it’s too new, and so your older Android device may not support it. If your device is rooted, though, then all you have to do is install the 1Controller Magisk module to make the DualSense controller map button presses properly.

We’ve covered this mod before, but in case you missed it, the 1Controller module basically provides layout files for various controllers, such as those from the PlayStations, Xbox controllers, and more. While Android has controller layouts for a bunch of popular controllers, such as the DualShock 4, the availability of controller layouts may vary depending on your manufacturer and Android version. Thus, if you have a controller that is popular but is not properly supported by your system, then this module will have you covered. Conveniently, this module supports the PlayStation 5’s DualSense controller which, being so new, may not be properly mapped on many Android devices.

1Controller XDA Thread

So, does this all sound good to you? It sure does to me. Be mindful that you do need to install Magisk on your device in order to install this module, so if you haven’t rooted your phone yet and you want to use your oh-so-white controller with your smartphone, then go install Magisk and then come back. Done? Then you should by all means go ahead and check out the newest version of this Magisk module.

Download the 1Controller Magisk Module

The post How to add support for the PlayStation 5’s DualSense controller on your rooted Android phone appeared first on xda-developers.



from xda-developers https://ift.tt/3t5zDvv
via IFTTT

vendredi 29 janvier 2021

Netflix is testing a sleep timer feature on Android

Do you fall asleep to your favorite show on Netflix? Great British Baking Show is a soothing option. If this is part of your nightly routine, we have good news: Netflix is launching a global test today on Android that will allow subscribers to set a sleep timer.

The feature will allow users to set a timer of 15 minutes, 30 minutes, 45 minutes, or to turn off when whatever they’re watching ends. Once these timers end, the Netflix app will stop. That’s the perfect solution for anyone who puts on a TV show or movie to help them sleep.

We actually got a glimpse of this feature toward the end of last year. In an APK teardown of the Netflix app for Android, we found reference to a sleep timer. At the time, we couldn’t find any related assets, so it was unclear how the feature would work. But now that Netflix’s sleep timer is officially in testing, we have a much clearer idea.

Netflix Sleep Timer

When you’re watching a program, you’ll see a new “Timer” button in the top right corner of the program you’re watching. This will then launch a timeline with the different options you can choose. If you’re still awake when the timer goes off, you can hit snooze like a normal alarm.

The Verge said the feature is being tested globally on Android devices, but Netflix is open to bringing it to more devices, including TVs. If the feature is popular among Netflix subscribers, we could see it become a more permanent part of the service.

Personally, I would love Netflix to introduce the opposite of a sleep timer. How often have you run into the “are you still watching” dialog? There’s no way to turn that off, and it often interrupts whatever show I’m binging.

Netflix’s sleep timer feature could work well with its audio-only mode, which is also being tested. Imagine putting on your favorite show and just listening to it as you fall asleep. Once the timer runs out, the Netflix app on Android could close.

That sounds like the perfect implementation of new features to me.

Netflix (Free+, Google Play) →

The post Netflix is testing a sleep timer feature on Android appeared first on xda-developers.



from xda-developers https://ift.tt/2NJCXMp
via IFTTT

Netflix is testing a sleep timer feature on Android

Do you fall asleep to your favorite show on Netflix? Great British Baking Show is a soothing option. If this is part of your nightly routine, we have good news: Netflix is launching a global test today on Android that will allow subscribers to set a sleep timer.

The feature will allow users to set a timer of 15 minutes, 30 minutes, 45 minutes, or to turn off when whatever they’re watching ends. Once these timers end, the Netflix app will stop. That’s the perfect solution for anyone who puts on a TV show or movie to help them sleep.

We actually got a glimpse of this feature toward the end of last year. In an APK teardown of the Netflix app for Android, we found reference to a sleep timer. At the time, we couldn’t find any related assets, so it was unclear how the feature would work. But now that Netflix’s sleep timer is officially in testing, we have a much clearer idea.

Netflix Sleep Timer

When you’re watching a program, you’ll see a new “Timer” button in the top right corner of the program you’re watching. This will then launch a timeline with the different options you can choose. If you’re still awake when the timer goes off, you can hit snooze like a normal alarm.

The Verge said the feature is being tested globally on Android devices, but Netflix is open to bringing it to more devices, including TVs. If the feature is popular among Netflix subscribers, we could see it become a more permanent part of the service.

Personally, I would love Netflix to introduce the opposite of a sleep timer. How often have you run into the “are you still watching” dialog? There’s no way to turn that off, and it often interrupts whatever show I’m binging.

Netflix’s sleep timer feature could work well with its audio-only mode, which is also being tested. Imagine putting on your favorite show and just listening to it as you fall asleep. Once the timer runs out, the Netflix app on Android could close.

That sounds like the perfect implementation of new features to me.

Netflix (Free+, Google Play) →

The post Netflix is testing a sleep timer feature on Android appeared first on xda-developers.



from xda-developers https://ift.tt/2NJCXMp
via IFTTT

Xiaomi sets February 8th as the Mi 11 and MIUI 12.5 global launch date

After launching the Mi 11 in China, Xiaomi is gearing up to announce details about an international rollout of the device at an event on February 8. The company is also set to announce the global rollout of MIUI 12.5.

Xiaomi previously launched the Mi 11 in China toward the end of last year. The release was particularly notable because it was the first smartphone to launch with the new Qualcomm Snapdragon 888. The chip is expected to power many of this year’s flagship 5G devices, including the Galaxy S21 series in the U.S.

Xiaomi’s event will likely see the company reveal price and availability in specific countries. GSMArena notes that Spain has already been confirmed as a new destination for the Mi 11, but other EU countries will likely get the device as well.

Xiaomi Mi 11 buttons

If you haven’t had the opportunity to purchase the Mi 11 yet, you’re in for a treat. We got our hands on the device a few weeks ago and found it to be a gorgeous and powerful device. It’s reminiscent of the Mi 10 Ultra, but even more powerful thanks to the new Snapdragon 888 chip.

We say it’s similar to the Mi 10 Ultra because the Mi 11 features some of the same specs, like the gorgeous 2K 120Hz OLED screen and the “squircle” shaped camera module. The devices looks and feels very similar, which isn’t a bad thing at all. It will be very interesting to see how the Mi 11 is priced in other regions of the world. But if Xiaomi keeps it low, it could be one of the best values on the market.

Xiaomi Mi 11 Forums

Xiaomi will also share more launch details about MIUI 12.5, which is a fairly modest update over MIUI 12.0. One of the nice new features in the update will allow users to hide icons of pre-installed apps. This will make it easy for users to keep their home screens nice and minimal.

We’ll bring you all the details from Xiaomi’s February 8 event as it happens.

The post Xiaomi sets February 8th as the Mi 11 and MIUI 12.5 global launch date appeared first on xda-developers.



from xda-developers https://ift.tt/3adLNcR
via IFTTT

One UI 3.1 vs One UI 3.0: Here are the new features that Samsung added

Samsung has done a great job of updating its devices to One UI 3.0 based on Android 11 over the last few weeks. The software update has already rolled out to several Galaxy devices, and we expect Samsung to maintain its fast rollout schedule for its next software release — One UI 3.1. For the unaware, One UI 3.1, which is also based on Android 11, debuted with the Galaxy S21 series earlier this month, and it packs quite a few new features and changes. The update has already started rolling out to the Galaxy Tab S7 and Tab S7 Plus, and it should arrive on other Galaxy devices in the coming weeks. While you’re waiting for the update to roll out to your device, here’s a quick look at all the new software features and changes included in One UI 3.1.

Note: Not all of these features will be available on other Galaxy devices. To find out what features are headed to your device, be sure to thoroughly read the update changelog when the One UI 3.1 update arrives on your device! In addition, this post doesn’t include some of the new features that are exclusive to the Galaxy S21 lineup.


New features in One UI 3.1

Google Discover feed integration

One UI 3.1 Google Discover feed integration One UI 3.1 Google Discover feed integration

You can customize the stock launcher on One UI 3.1 to display the Google Discover feed on the minus-one screen. By default, the stock launcher is configured to show Samsung Free on the minus-one screen, but you can change that by following these steps:

  • Tap and hold on the home screen to open the customization settings.
  • Swipe all the way to the left until you see the following page
  • Tap on the Google Discover option

The Google Discover feed will then show up on the minus one screen. You can switch back to Samsung Free anytime you want by following the same steps. You can also turn off the feature altogether by tapping on the toggle in the top right corner.

Google Home Device Controls

Samsung One UI 3.1 device controls (1) Samsung One UI 3.1 device controls (2)

Samsung has integrated Android 11’s Device Controls feature into the ‘Devices’ option in quick settings. With this feature, you can add smart home devices from Google Home and other compatible smart home apps to this menu. The feature lets you easily control all your connected Google Home devices without opening up the Google Home app. You can follow this guide to access Google Home Devices controls on Galaxy devices running One UI 3.1

Google Duo integration

Samsung has worked closely with Google to offer better Google Duo integration in One UI 3.1. The company’s latest software release features seamless Google Duo integration in the stock dialer app. As you can see in the below screenshots, the three-dot menu in the stock dialer now has a new ‘Make video calls using’ option. Tapping on this option lets you select Google Duo as your preferred video calling service.

Google Duo integration in stock dialer app Google Duo integration in stock dialer app Google Duo integration in stock dialer app

Once you select Google Duo as the default video calling service, you’ll notice a new Google Duo button next to the call button on the dialer whenever you select a contact who’s available on Google Duo. You can tap on this button to instantly start a video call with the contact.

Along with seamless Google Duo integration in the stock dialer, the Galaxy S21 lineup also supports Google Duo’s auto-framing feature. The feature automatically keeps you front and center during video calls, eliminating the need to adjust the frame constantly. As of now, it isn’t clear if the feature will roll out to other Samsung devices with the One UI 3.1 update.

Video call effects

While we’re on the topic of video calling, let’s take a look at another cool new feature in One UI 3.1 — Video call effects. The feature can be found within the ‘Advanced features’ section in the device settings, and it lets you automatically add cool background effects during video calls.

One UI 3.1 video call effects One UI 3.1 video call effects

As you can see in the attached screenshots, the feature currently offers three background effects — Blur, Color, and Image. When enabled, the Blur option adds a background blur in the video calls, the Color option covers the background in a solid color, and the Image option covers the background with a custom image of your choice.

After you select one of the three options, you can tap on the ‘Preview’ button to see what the background will look like during video calls. The page also lists supported apps that will make use of the video call effects once the feature is enabled. For a demo of what this looks like, check out our dedicated article on the topic.

Remove GPS location data from photos & Private Share

During the Galaxy Unpacked event, Samsung talked about a new privacy-related feature for the Galaxy S21 lineup. The feature lets you easily remove location data from photos before you share them.

Remove location data from images

To do so, all you need to do is select a photo in the Gallery app, hit the share button, and then tap on the “Remove location data” option underneath the preview in the share sheet. Using this feature will strip the photo of location data like the latitude and longitude of where it was taken before it’s shared.

Private Share option in One UI 3.1 settings

To give you more control over the content you share, Samsung has also launched a new Private Share app. You can use it to share any file, including images, videos, and documents, and choose when to revoke access to the file. However, you first need to enable the app from the device settings. You can do so by heading over to the Biometrics and security settings and tapping on the new Private Share option. This will open up a new window that will let you add the Private Share app to the app drawer.

Galaxy S21 Private Share Galaxy S21 Private Share Galaxy S21 Private Share

You can then open the app by tapping on the Private Share icon, tap on the ‘Share files’ button in the menu, and then select the recipient from the following screen. The app will then let you manually revoke access to the file at any time, or you can wait 2 days for the recipient’s access to automatically expire. The new Private Share app works on all Galaxy devices running Android 9 or later, but both the sender and the recipient need to have the app installed on their device to share files.

Continue apps on other devices

If you’re a part of the Samsung Galaxy ecosystem and use more than one Galaxy device regularly, then One UI 3.1 packs a cool new feature for you. The feature, called ‘Continue apps on other devices,’ can be found within the Advanced features section of the device setting. Once enabled, it lets you continue using an app on a different device that’s signed in to the same Samsung account.

One UI 3.1 continue apps on other devices One UI 3.1 continue apps on other devices

To continue using an app on a different device, all you need to do is open up the Recents screen on the other device and tap on the new icon. You can also use this feature to copy text, images, and more on one device and paste them on the other device. But you’ll need to have this feature enabled on both devices for it to work as expected. You’ll also need to turn on Bluetooth on both devices and ensure that they’re connected to the same Wi-Fi network.

It’s worth noting that this feature currently only works with the Samsung Internet and Samsung Notes apps. But Samsung may expand support to more apps in the near future.

Eye comfort shield

Eye comfort shield is a new feature in One UI 3.1 that builds upon the Blue Light Filter feature found on previous versions of the software. The feature can be found within the Display settings, and it lets you limit exposure to blue light by altering the display colors.

Eye comfort shield Eye comfort shield Eye comfort shield

As you can see in the attached screenshot, the feature includes two options — Adaptive and Custom. The Adaptive option automatically adjusts the colors based on the time of the day to limit blue light. While using this feature, you’ll notice minor color adjustments during the day and significantly warmer colors at night.

The Custom option lets you manually select the color temperature based on your preference. It also lets you set up a schedule to enable your custom color settings automatically. You can either have your custom color settings enabled all the time, vary from Sunrise to Sunset, or change at a specified time.

Object eraser

The Galaxy S21 devices also come with a new Object Eraser feature in the Gallery app. The feature lets you easily remove unwanted objects from your photos. However, the feature isn’t enabled by default. To enable it, you’ll need to tap on the three-dot menu button in the top right corner of the editor. In the drop-down menu, you’ll have to select the new Labs options and then tap on the toggle next to the ‘Object eraser’ feature on the following page.

One UI 3.1 Object Eraser One UI 3.1 Object Eraser One UI 3.1 Object Eraser One UI 3.1 Object Eraser One UI 3.1 Object Eraser

Once the feature is enabled, you’ll see a new icon in the image editor with a prompt highlighting its functionality. To remove an object from your image, tap on the new icon and then select the unwanted object on the following page. The feature will then highlight the selected object, and you can tap on the ‘Erase’ button to remove it. In my testing, I found that the feature does an ‘OK’ job of removing objects. Your mileage may vary.


New Camera features in One UI 3.1

Director’s view

One UI 3.1 Director's View

The new Director’s view feature on the Galaxy S21 lineup lets you capture videos from all the cameras on the device simultaneously. On the Galaxy S21 Ultra, this means that you get access to four different camera angles at the same time on the viewfinder, and you can switch between them seamlessly.

Vlogger view

The Vlogger view on Galaxy S21 devices lets you use the front and rear camera simultaneously. This is great for vloggers, as it lets them capture their reactions while recording something from the rear camera at the same time. It’s worth noting that while Samsung talked about the feature during the Galaxy Unpacked event, I wasn’t able to find it on my review unit.

Single Take 2.0

Single Take 2.0

Samsung has updated the Single Take feature with the launch of the Galaxy S21 lineup, and it now lets you capture more frames each second. On top of that, Single Take 2.0 also records slow-motion clips. Furthermore, the feature now also lets you choose the type of shots you wish to capture. You can tap on the new arrow icon in the top right corner and then select shots from the following menu. The feature offers 6 options to choose from — Filtered videos, Filtered photos, Speed effect clips, Portraits, Wide/cropped shots, and Highlight videos.

Focus enhancer

The camera app on the Galaxy S21 Ultra also includes a Focus enhancer option that pops up in the bottom right corner of the viewfinder while using the primary 108MP camera. The toggle only shows up when you’re trying to take a picture of a nearby object, and it ensures that the entire object remains in focus.

One UI 3.1 Focus enhancer

This is one major issue I had with the primary camera on the Galaxy Note 20 Ultra, and I’m glad Samsung has added this new feature to address that. I sincerely hope Samsung rolls it out to the Galaxy Note 20 Ultra and the Galaxy S20 Ultra with their One UI 3.1 update.


One UI 3.1 for Galaxy Tab tablets

Samsung recently began rolling out the Android 11-based One UI 3.1 update to the Galaxy Tab S7 and Tab S7 Plus. The update adds a plethora of new productivity features, including multi-device collaboration, Second Screen, and wireless keyboard sharing. You can read about these new productivity features in more detail here.


Other minor changes in One UI 3.1

Along with all the features mentioned above, Samsung has made some other minor changes in One UI 3.1. Here’s a quick rundown of all the changes I managed to find on my Galaxy S21 Ultra:

  • The device now offers a larger selection of vibration patterns for calls.
  • The Sounds and vibration settings now also include an option to select vibration patterns for notifications.
  • You can now access Home Screen settings from within the Settings app.
  • Samsung has added a new option in the Privacy settings that lets you turn off customization services (ads/personalized recommendations) while using mobile data.
  • One UI 3.1 includes a couple of additional custom call backgrounds,
  • The Clock app now includes new Bedtime & wake up alarms.
  •  Live focus and Live Focus video in the camera app have been renamed to Portrait and Portrait video.
  • Samsung Free is now available as a standalone app.

Which of these One UI 3.1 features are you most excited about? Share your thoughts in the comments below!

    Samsung Galaxy S21 Ultra
    The Samsung Galaxy S21 Ultra is the ultimate overkill in the new 2021 flagship series, packing in a flagship SoC, a premium build, a great display, and an amazing camera setup, as well as all the extras expected on a premium flagship.

The post One UI 3.1 vs One UI 3.0: Here are the new features that Samsung added appeared first on xda-developers.



from xda-developers https://ift.tt/3comlnB
via IFTTT